Neptune DOS + DDR Combo

Description

This package includes:

• 1x – Apex Dosing Pump
• 1x – Apex DDR Dosing Resirvour

The DŌS is a multi-purpose Dosing and Fluid Metering System. The DŌS connects
to any Apex via its AquaBus connection. The true versatility and functionality
of the DŌS comes to life via the software wizards built into Apex Fusion. This
takes dosing to a whole new level in terms of ease of use as well as
functionality when compared to standalone dosing systems because the DŌS is
part of your Apex ecosystem. Not only can you integrate it into other
operations and devices you have configured, but we also will be continuing to
expand on its capabilities as time goes on via software updates to Apex Fusion.

The #1 reason people purchase a dosing system for their
aquariums is for consistent and easy dosing of 2-part solutions (calcium and
alkalinity) to their reef tanks. The DŌS wizards in Apex Fusion take this to
the next level by integrating a feedback loop from your water testing to make
suggestions to fine tune the amount you dose each day. Simply put in your tank
size and after a few days of entering testing results, it will help you refine
your dosing amounts for the demand of your particular aquarium. No more
guessing. No more fooling with the timings.

Hate doing water changes? Everyone does – so they never get
done as often as they should. Not only that, water changes are disruptive to
the stability of your system since all of that change is happening at once.

With the DŌS all you do is place your empty vessel and your fresh stock of
saltwater under your stand. Then, with the Apex Fusion wizard just tell it
amount of water you want to change over what length of time and the hours of
the day you want it to happen and it figures it all out for you. It will
perform an automatic, continuous water change for you. It gets better. If you
have our dual optical water sensing accessory Apex Fusion will send you an
email or text message letting you know it is time to change out the jugs. Less
time pumping, siphoning, and sloshing water and more time enjoying a great
aquarium.

Specifications

Size (Approx.): 9.5″ x 5″ x 5″

Weight (Approx.): 4 pounds

Lift Height: 24 feet (minimum at MSL)

Suction Height: 24 feet

Flow Rate: Variable (0.1ml – 250ml/min)

Power Requirement: 110/120V or 220/24oV

Requires: Apex, Apex Lite, or Apex Jr.

DDR

This attractive fluid containment system stores your dosing fluids in style and
even tells you when it’s time to refill!

• Each side stores two liters (2L) of fluid
• Connects directly to your DŌS
• Optical sensors inform your APEX when levels are low
• Strong, cast-acrylic construction
• Low-profile won’t easily tip over
• Easy to refill
• Push-fit tubing connections
• Use for 2-part (Alk/Cal), additives and other applications

Style Meets Function, Deceiving Capacity, No-tip design

The DDR has great style and will stand out in anyone’s
equipment room. But it’s not just about style. It may not look like it, but
each side of the reservoir holds an ample two liters (2000 mL) of fluid. For
most saltwater aquariums that are dosing Calcium and Alkalinity to their
aquariums, this amount is more than enough to last at least two weeks. If you
were dosing other additives it might last months before needing a refill.

Speaking of refills, the DDR has easy lift off lids that
make refilling it super easy.

The DDR was also designed to have a low center of gravity.
This means, unlike other reservoirs on the market, it is very difficult to
inadvertently tip over and ruin your day.

Optical Sensors Alert You When It’s Time to Refill

The DDR is the only dosing container on the market that
connects electrically to your DŌS and uses optical sensors that alert you when
your fluid has approximately 20% remaining. This alert could be used to send
you a text or an email, or even trigger other events on your Apex. Also, when
detecting water level, optical sensors are far less likely to fail than their
float switch counterparts.

Connects Directly to your DŌS

One simple connection links the DDR to the DŌS. No worries
about fooling around with loose wires, float switches, etc. Just plug it in and
it will show up in your Apex Fusion Dashboard.

Ready for Apex Fusion

Although not required, the DDR interfaces directly into your
Apex Fusion dashboard. See in realtime your fluid levels and get an alarm when
a reservoir runs low.

Specifications

• Size (Approx.): 10.5″ x 8.5″ x 5.5″
• Fluid Capacity (Approx.): 2000ml per side
• Weight (Approx.): 2 pounds
• Requires: Apex, Apex Lite, or Apex Jr. and DŌS to operate sensors
• Package includes: DDR, 4m of DŌS tubing