Neptune Systems COR 15 Return Pump 1500 GPH

Description

UPC: 653078004342

Connects to any Neptune 1Link or EB832!

The intelligent Neptune COR-15 Return Pump is easily the
smartest pump available. Directly connecting to any Neptune EnergyBar832 or
1Link module, you no longer have bulky power adapters or wall warts to power
the COR pumps saving you outlet space and making cord management easier to work
with. COR pumps come standard with advanced control features that can be found
by using the Apex Fusion Cloud Software. Add a COR pump to your system today to
see the difference.

• IQ-Level Technology
• Energy Efficient
• Extremely Quiet
• 1Link Power Connection
• Temperature Monitoring
• Up to 1500 GPH
• Internal or External
• No Power Bricks

COR-15 Requires Apex Controller.

Don’t have an Apex? Check out the Neptune
Systems COR-20.

Advanced Control

The COR pumps were built from the ground up with control in
mind. Have power over everything including the CORs output percentage,
real-time operational feedback, compared feed routines, pump status can
all be monitored and controlled with Apex Fusion. Once the COR pump is plugged
into a 1Link port, and after a couple button presses you can set the pumps
flow rate and feed mode settings. By enabling IQ-Level, you can set the min and
max flow rates for your aquarium.

Up to 1500GPH

The powerful COR-15 can push up to 1500 gallons per hour
with an incredibly efficient head-loss curve. Each pump comes with
multiple different output fittings that let you adapt the COR pumps output
to match your reef tanks current plumbing size. It is suggested to use the
largest 1.25″ Union that is included, but it is totally fine to use the
other 0.75″ or 1.0″ adapters if needed.

IQ-Level Technology

Because not all aquariums are alike, Neptune Systems
included IQ-Level technology with every COR pump. Customize the minimum and
maximum speed settings for your tanks plumbing to the ideal flow rate, but also
the minimum flow rate for in tank flow and feed modes as well.

Whisper Quiet

Neptune’s COR uses the latest in Vector Control, BLDC motor
technology. Driving the COR pump in a way that is super energy
efficient using less than 50W at full power, and staying vibration and
noise free.

Operational Feedback

Know what is going on with your pump at all times. COR pumps
come loaded with features that let you monitor your aquariums “heart”
giving you the chance to fix something before it fails. Saltwater aquariums are
notorious for creating calcium and other mineral build-up on pumps and
there internal parts that can inhibit the flow but more importantly could cause
damage to the pump. Neptune Fusion lets you monitor the pumps internal
temperature along with its wattage draw and flow rate allowing you to set alarms
and alerts if something goes out of their normal thresholds. If the temperature
of the pump increases to unsafe levels, the COR will actually slow itself down
until temperatures reach a safe level again, giving you time to react and
maintain the pump.

Compatible with any Apex Controller (requires
1Link port)

Don’t have a 1Link port on your Apex System? Check out
the Neptune 1Link
Module

Need a longer 1Link Cable? Check out the 1Link
Extension Cable

Specifications:

Pump Dimensions – 3.875″ W x 4.875″ H x
6.250″ D

Driver Dimensions – 3″ W x 4″ H x 1″ D

Max Flow – 1500 GPH

Max Head – 14FT

Input Size – 1″ Slip PVC

Output Size – 3/4″ Slip PVC or 1 1/4″ Slip to BSPP
Union

Power Consumption – Less than 50W @ 120VAC

What’s Included?

1x COR-15 Pump Body

1x COR Driver Controller

1x 1.25″ PVC Union (slip to BSPP)

1x 1″ Slip Fitting

1x 0.75″ Slip Fitting

1x 4-meter (13-foot) 1Link Cable